{"@context":"https://schema.org/","@type":"Product","name":"ProForm CR2 - 2 Flute Corner Radius End Mill (55 HRC)","image":["https://jaypee-images.s3.ap-south-1.amazonaws.com/products/jpcnc-proform-cr2-end-mill.png","https://jaypee-images.s3.ap-south-1.amazonaws.com/products/jpcnc-proform-cr2-dimension-drawing.png"],"description":"

JP CNC ProForm CR2 – 2 Flute Corner Radius End Mill - 55 HRC

Product Description:

Two-flute corner radius for slotting and pocket work where the corner needs protecting. The radius spreads the load off the weakest point on the tool and cuts the floor fillet at the same time. Order by designation plus the radius you need from the R column.

Slotting with a protected corner
Floor and fillet in one pass
Chip resistant corner
R0.1 to R3.0 specified at order

Key Data:

Diameter range	Ø1 - Ø20 mm
Radius range	R0.1 - R3.0 mm
Work hardness	55 HRC
Coating	TiSiN
Shank	Plain h6, metric
Work materials	Mild and alloy steel · grey iron · pre-hardened steel to 55 HRC
Operations	Slotting · pocket roughing · floor and fillet milling
Industries	Tool, die and mould · general engineering

Specifications (K01 - K32, 32 codes, all dimensions in mm):

Order Code	Designation	D	R Available	Lc	L	d	Z	HRC	Coating
K01	1x3x50L-D4-2F	1	0.1/0.2/0.3	3	50	4	2	55	TiSiN
K02	1.5x4x50L-D4-2F	1.5	0.2/0.3	4	50	4	2	55	TiSiN
K03	2x5x50L-D4-2F	2	0.2/0.3/0.5	5	50	4	2	55	TiSiN
K04	2.5x8x50L-D4-2F	2.5	0.2/0.3/0.5	8	50	4	2	55	TiSiN
K05	3x8x50L-D4-2F	3	0.2/0.3/0.5/1.0	8	50	4	2	55	TiSiN
K06	4x10x50L-D4-2F	4	0.2/0.3/0.5/1.0/1.5	10	50	4	2	55	TiSiN
K07	4x16x75L-D4-2F	4	0.2/0.3/0.5/1.0/1.5	16	75	4	2	55	TiSiN
K08	4x20x100L-D4-2F	4	0.2/0.3/0.5/1.0/1.5	20	100	4	2	55	TiSiN
K09	5x13x50L-D6-2F	5	0.2/0.3/0.5/1.0	13	50	6	2	55	TiSiN
K10	6x15x50L-D6-2F	6	0.2/0.3/0.5/1.0/1.5/2.0	15	50	6	2	55	TiSiN
K11	6x25x75L-D6-2F	6	0.2/0.3/0.5/1.0/1.5/2.0	25	75	6	2	55	TiSiN
K12	6x30x100L-D6-2F	6	0.2/0.3/0.5/1.0/1.5/2.0	30	100	6	2	55	TiSiN
K13	8x20x60L-D8-2F	8	0.3/0.5/1.0/1.5/2.0/2.5/3.0	20	60	8	2	55	TiSiN
K14	8x28x75L-D8-2F	8	0.3/0.5/1.0/1.5/2.0/2.5/3.0	28	75	8	2	55	TiSiN
K15	8x35x100L-D8-2F	8	0.3/0.5/1.0/1.5/2.0/2.5/3.0	35	100	8	2	55	TiSiN
K16	10x25x75L-D10-2F	10	0.5/1.0/1.5/2.0/2.5/3.0	25	75	10	2	55	TiSiN
K17	10x40x100L-D10-2F	10	0.5/1.0/1.5/2.0/2.5/3.0	40	100	10	2	55	TiSiN
K18	12x30x75L-D12-2F	12	0.3/0.5/1.0/1.5/2.0/2.5/3.0	30	75	12	2	55	TiSiN
K19	12x45x100L-D12-2F	12	0.3/0.5/1.0/1.5/2.0/2.5/3.0	45	100	12	2	55	TiSiN
K20	14x35x80L-D14-2F	14	0.3/0.5/1.0/1.5/2.0/2.5/3.0	35	80	14	2	55	TiSiN
K21	14x45x100L-D14-2F	14	0.3/0.5/1.0/1.5/2.0/2.5/3.0	45	100	14	2	55	TiSiN
K22	16x45x100L-D16-2F	16	0.3/0.5/1.0/1.5/2.0/2.5/3.0	45	100	16	2	55	TiSiN
K23	18x45x100L-D18-2F	18	0.3/0.5/1.0/1.5/2.0/2.5/3.0	45	100	18	2	55	TiSiN
K24	20x40x100L-D20-2F	20	0.3/0.5/1.0/1.5/2.0/2.5/3.0	40	100	20	2	55	TiSiN
K25	6x40x150L-D6-2F	6	0.3/0.5/1.0/1.5/2.0/2.5/3.0	40	150	6	2	55	TiSiN
K26	8x50x150L-D8-2F	8	0.3/0.5/1.0/1.5/2.0/2.5/3.0	50	150	8	2	55	TiSiN
K27	10x50x150L-D10-2F	10	0.3/0.5/1.0/1.5/2.0/2.5/3.0	50	150	10	2	55	TiSiN
K28	12x60x150L-D12-2F	12	0.3/0.5/1.0/1.5/2.0/2.5/3.0	60	150	12	2	55	TiSiN
K29	14x60x150L-D14-2F	14	0.3/0.5/1.0/1.5/2.0/2.5/3.0	60	150	14	2	55	TiSiN
K30	16x60x150L-D16-2F	16	0.3/0.5/1.0/1.5/2.0/2.5/3.0	60	150	16	2	55	TiSiN
K31	18x70x150L-D18-2F	18	0.3/0.5/1.0/1.5/2.0/2.5/3.0	70	150	18	2	55	TiSiN
K32	20x70x150L-D20-2F	20	0.3/0.5/1.0/1.5/2.0/2.5/3.0	70	150	20	2	55	TiSiN

Designation key: cutting diameter x length of cut x overall length - shank diameter - number of flutes. Ball nose codes carry the radius first. All shanks are plain h6 metric and run in standard ER11 to ER40 collets on BT30/40/50, CAT40/50, HSK-A63/A100 spindles. AluForce AL1 is also offered on a Ø3.175 mm shank for router spindles. Non-standard lengths of cut, necked reach and alternative coatings are ground to order - ask us with the feature you need to reach.

Disclaimer:

Before making an enquiry, please take a moment to review our FAQ's, Terms & Conditions, Shipping & Delivery Policy, and Privacy Policy - these apply to all purchases. You can find them linked in the footer of our website to help avoid any misunderstandings.

","brand":{"@type":"Brand","name":"JP CNC"},"offers":{"@type":"AggregateOffer","lowPrice":100,"highPrice":100,"offerCount":1,"priceCurrency":"INR","availability":"https://schema.org/InStock","itemCondition":"https://schema.org/NewCondition","seller":{"@type":"Organization","name":"Jaypee Associates","url":"https://jaypeeassociates.com"}},"category":"CUTTERS AND ENDMILLS"}